ESG3

ESG3 Encoder & Sync Generator frontpanel

ESG3 is a complex analog video output module supporting SD Composite and SD/HD Component video formats. With 12 analog function blocks on its frontend controls, the user can find results ranging from simple color correction to heavily stylized multi band colorization.

  • RGB Processor / Colorizer

  • RGB Inverter

  • RGB Mute

  • SD/HD Video Sync Generator supporting NTSC, PAL, 480p, 576p, 720p50, 720p5994, 720p60, 1080i50, 1080i5994, 1080i60, 1080p2398, 1080p24, 1080p25, 1080p2997, 1080p30

  • SD/HD Component Video Encoder supporting NTSC, PAL, 480p, 576p, 720p50, 720p5994, 720p60, 1080i50, 1080i5994, 1080i60, 1080p2398, 1080p24, 1080p25, 1080p2997, 1080p30

  • SD Composite Video Encoder supporting NTSC and PAL

HP

12

Power Consumption +12V

300mA

Frontpanel Legend

ESG3 Encoder & Sync Generator frontpanel legend

Ref

Description

Range

P1

Red Contrast

0x to 4x, 1x

P2

Green Contrast

0x to 4x, 1x

P3

Blue Contrast

0x to 4x, 1x

P4

Red Brightness

-1V to +1V, 0V

P5

Green Brightness

-1V to +1V, 0V

P6

Blue Brightness

-1V to +1V, 0V

S1

RGB Function

Invert (Up), Enable (Center), Mute (Down)

S2

Red Function

Invert (Up), Enable (Center), Mute (Down)

S3

Green Function

Invert (Up), Enable (Center), Mute (Down)

S4

Blue Function

Invert (Up), Enable (Center), Mute (Down)

S5

Video Format Switch

See settings chart below

J1

Red Input

0V to +1V, DC coupled

J2

Green Input

0V to +1V, DC coupled

J3

Blue Input

0V to +1V, DC coupled

J4

Composite Output

714mVpp video, 286mVpp sync, 75 ohm impedance, AC coupled

J5

Ys/Gs Output

714mVpp video, 286mVpp sync, 75 ohm impedance, AC coupled

J6

Pb/B

714mVpp video, 75 ohm impedance, AC coupled

J7

Pr/R

714mVpp video, 75 ohm impedance, AC coupled

I1

Sync Input LED

Detected (Green), Not Detected (Yellow)

I2

Composite Output LED

Enabled (Green), Disabled (Yellow)

Video Format Switch

ESG3’s format selection switch determines the module’s video output format and video sync standard. Additionally, the user may select between YPbPr and RGB colorspace modes for the Component output encoder. In most cases, the user should select the YPbPr component output mode. Optionally, RGB component output mode may be used with some displays and capture devices if supported.

0 represents the switch’s OFF state. 1 represents the switch’s ON state. x indicates a position irrelevant to the listed setting.

Format

Setting

NTSC

0000xxxx

PAL

1000xxxx

480p5994

0100xxxx

576p50

1100xxxx

1080i5994

0010xxxx

1080i60

1010xxxx

720p5994

0110xxxx

720p60

1110xxxx

1080i50

0001xxxx

1080p2398

1001xxxx

720p50

0101xxxx

1080p2997

1101xxxx

1080p24

0011xxxx

1080p25

1011xxxx

1080p30

0111xxxx

RGB Out

xxxxxxx1

YPbPr Out

xxxxxxx0